Our Inventory

• One-ton roller offers dual-drum drive and articulated steering.
• 18-hp Honda or Vanguard engine
• 35.4-inch drum width
• 414 foot per minute travel speed
• 3,000 pounds of centrifugal force

Automatic Switch

Lightweight, portable, single phase submersible pumps are designed to handle water and solids.
Built for the demands of construction, mining, municipality and farm applications.

Features and benefits

• Lightweight, compact design for easy transport and positioning of pump.
• Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs.
• Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs.
• Insulation on all conductors of the power cable is protected by a water block system to prevent wicking of water into the motor.
• Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection.
• Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid.
• Semi-vortex impeller allows for optimum wear resistance.
• The necessary water level to operate the pump is 4-1/2" from the bottom of the pump.

• Model PT2

• Self-priming high performance pump capable of handling solids up to 1 inch, ideal for most jobsites that require fast dewatering on command.
• Hardened ductile iron impeller and volute with a patented volute insert provides a rugged, easy to maintain pump that will stay on the job longer.
• High strength, lightweight aluminum housing, compact with easy access, allows extra years of trouble-free operation.
• Radial flow design produces high volume and head for superior pump performance.
• Quality components such as carbon ceramic mechanical seals for extra-long life.

Features

• Designed for compaction in confined areas of granular soil in narrow trenches.
• Ideal for curbs, gutters, around tanks, forms, columns, footings, guard railings, drainage ditches, gas and sewer works and building construction.
• Special contoured running surfaces and rounded edges provide maximum performance and maneuverability.
• Completely enclosed belt protected by a lightweight belt-guard for reduced wear and minimal service.
• Newly designed "low-vibration" guide handle greatly improves operator comfort and minimizes operator fatigue.
• Heavy-duty shock mounts on engine console dampen vibrations thereby reducing wear on the components.
• Exciter bearing design requires minimal maintenance for improved productivity.
• Single direction plate compactor gas powered
• Ergonomically designed lifting handles offer easier loading and unloading for operator during transport.
• Optional large capacity water tank provide higher productivity.

• Model BS60-2I

• Patented low oil shutoff provides unique technology that protects the engine. When starting the unit, an electronic capacity sensor detects no oil or low oil and the engine will shut off within about 10 seconds
• Purge bulb evacuates air from the fuel line for easy starting
• The fuel valve and kill switch are integrated into the throttle lever to reduce complexity of operation
• Exclusive carburetor compensates fuel/air mixture for optimum performance and extended air filter life
• A unique three-stage air filtration system provides a virtually dust-free engine for longer life and improved durability
• Dedicated 4-cycle crankcase for increased durability and simplified maintenance
• Unique crankcase breather system and three piece piston oil ring provide for lower oil consumption
• Ignition and fuel shut off built into the throttle control provides simplified operation
• Cast aluminum recoil start with oversized durable rope extends life in harsh environments
• The guide handle's engineered shock mount system reduces HAV (hand-arm vibration) and improves operator comfort

These vibratory plates offer the best compaction of various types of soil. They show their true strength when working on semi-cohesive soils in particular. These reversible plates provide optimum performance along with a variable forward and reverse speed of up to 79ft/min. Plus, the dual shaft exciter technology provides the maximum possible compaction depth in most types of soil.

Features and Benefits

• These low profile units feature standard extension plates providing adjustable operating widths.
• Variable forward and reverse travel for flexible applications: perfect for compaction in trenches and large areas as well as for vibration of interlocking medium-sized paving stones.
• The unique, integrated wheel set simplifies the task of moving a reversible plate around the shop floor and job site.
• Maximum degree of safety with the operator present control: the control prevents the operator from getting caught between machine and obstacle when traveling backwards.
• Tough ductile iron baseplate is extremely durable even under extreme conditions and provides for long service life

• Model 3050A

• Reliable vibratory plate compactors offer maximum mobility.
• Versatile reversible plates ideal for compaction of interlocking paving stones, trenches, landscaping and maintenance.
• Integrated wheel set simplifies the task of moving a reversible plate around the showroom, shop floor and job site.
• An adjustable guide handle can be locked into a vertical position for easy transport and storage.
• Heavy-duty frame features a central lifting point for easy on/off loading and placement of plate into trenches.
• Tough ductile iron baseplate is extremely durable even under extreme conditions and provides for long service life.
• Specially designed shock-mount system offers a virtually vibration-free guide handle for increased operator comfort and reduced operator fatigue.

Use the WACKER NEUSON 2-Inch Dewatering Pump With Honda® Engine as a temporary water removal source when clearing out clean water from your swimming pool, pond or jobsite. It features a cast iron volute and impeller designed for wear resistance and reduced maintenance. For ideal pumping action, the Wacker Neuson PG2A 2-inch dewatering pump has a robust 3.5 hp Honda engine. To prevent engine damage, it uses an oil shutdown feature that turns the pump off in the event of low oil. Located on the back of the impeller are pump out vanes that increase the pump's productivity and efficiency. A carbon ceramic seal increases the lifespan of the pump and the engine. For fast results, the gasoline dewatering pump moves water at a speed of 159 gpm. While it weighs only 53 pounds, the pump's aluminum housing helps protect the engine and pump, reducing maintenance costs and improving overall lifespan.

Model 90XP has a distinguished career of well over 20 years, serving tree care professionals, rental companies and municipalities needing a productive, cost-effective, and durable chipper. Whether working brush clearing, utility clearing, or rental duties, this fleet-favorite features a wide throat opening and Bandit's proven Slide Box Feed System. It's extremely productive and efficient in processing large amounts of brush at once, as well as big limbs and small trees.

Rugged construction

• Designed and built for long life in tough applications
• Heavy-duty boom for demanding applications
• Cat exclusive, high-pressure XT-3 hose
• O-ring face seal fittings
• Enclosed oil-disc brakes seal out contamination for increased service life
• Operator station provides falling object and rollover protection (FOPS/ROPS)

• Powerful Caterpillar 3054 T turbocharged diesel engine
• 4-speed full Power-Shift transmission for responsive performance
• Full-time all-wheel drive (AWD)
• Planetary drive axles
• Front axle differential lock
• High ground clearance to keep machine moving in poor underfoot conditions
• All mechanical drive

• Low boom position provides operator with excellent all-around visibility, particularly to the right and rear of the machine
• Close fitting fenders and profiled engine cover further enhance visibility

• Power brakes and power steering increase operator efficiency
• Tilt steering column for operator comfort
• Fully adjustable suspension seat with retractable seat belt
• Isolation-mounts reduce vibration and noise
• Low effort single joystick - hydraulic control.

• Three steering modes
• Tight turning radius
• Compact dimensions allow Cat Telehandlers to operate effectively in crowded work areas
• Single, double-acting steering cylinders protected above the axles
• Oscillating rear axle with differential lock on front axle.

The Cat 307E Mini Hydraulic Excavator delivers superior performance and comfort while reducing your fuel consumption and operating costs. The large spacious cab provides a comfortable work area. Intuitive seat-mounted controls are easy to use for greater job accuracy and efficiency. The standard tail swing design incorporates a counterweight that extends further back on the machine. This provides leverage to create a stable work platform during lifting and digging. The 307E sets the standard for conventional tail swing excavators in the eight-ton size class.

FEATURES:
The Cat® 303.5D CR Mini Hydraulic Excavator delivers high performance in a compact design to help you work in the tightest applications.

The 303.5D CR features the following:

• Spacious, comfortable operator station provides superior legroom and excellent visibility to minimize fatigue.
• Zero Tail Swing design lets you work within confined areas. The radius of the upper body stays within the width of the undercarriage so the operator can concentrate on the work being done without having to worry about the back of the machine.
• High digging forces, fast cycle times and increased stability boost your productivity.
• Load sensing hydraulics provide smooth, powerful performance as well as increased fuel efficiency.
• Fingertip control for the boom swing and auxiliary hydraulic functions makes operation easier while providing more foot room.
• Choice of stick lengths are available to meet your application needs. Sticks come “thumb-ready” as standard with brackets and relief valves installed from the factory (optional in Europe).
• Automatic 2-speed improves maneuverability around the job site by balancing high speed and torque travel requirements.
• Angle dozer blade option can be positioned straight ahead or up to 25 degrees to the left or right for greater machine versatility.
• Over 200 degrees of bucket rotation provides greater material retention during truck loading and easier vertical wall digging without having to reposition the machine.
• A variety of Cat Work Tools are available including hammers, augers and thumbs. The Cat Quick Coupler makes work tool changes fast and easy.

Cat's zero-tail-swing 301.7D CR mini excavator can work comfortably in confined work areas with the machine upper frame able to slew within its track width. With standard telescoping undercarriage, the machine is just 3 ft. 3 in. wide when retracted but lays down a 4-ft. 3-in. stance when the tracks are extended. Two-way auxiliary hydraulics allow operation of a hammer and bi-directional tool such as augers. The optional second hydraulic function is operated by a proportional roller on the left-hand joystick. The option includes a switch that allows the operator to vary auxiliary hydraulic flow to suit individual work tools.

• Two travel speeds
• Net power: 17.9 hp
• Operating weight: 3,726 lb.
• Dig depth: 7 ft. 7 in.
• Dump height: 8 ft.

FEATURES:
The Cat® 305.5E2 CR Mini Hydraulic Excavator delivers high performance, durability and versatility in a compact design to help you work in a variety of applications. The 305.5E2 CR features the following:

QUALITY

• The durable hoods and frame and the compact radius design of the 305.5E2 let you work comfortably and confidently in confined areas.
• The operator environment includes a high quality suspension seat, easy to adjust armrests and 100% pilot controls which offer consistent and long-lasting controllability.

• High Definition Hydraulic System provides a load sensing and flow sharing capability leading to operational precision, efficient performance and greater controllability.
• Power on Demand provides optimal efficiency and performance the moment you need it. This automatic system ensures fuel efficiency through appropriate engine rating to meet all operational needs as required.

• Broad range of Cat Work Tools make the Cat Mini Excavator a versatile machine able to meet the requirements of any job site.
• Over 200 degrees of bucket rotation provides greater material retention during truck loading and easier flat wall digging without having to reposition the machine.

FEATURES:
The Cat® 247B Series 2 Multi Terrain Loader, with its radial lift design, delivers excellent digging performance with outstanding drawbar power. Its suspended undercarriage system provides superior traction, flotation and the ability to work in a wide range of underfoot conditions.

The 247B Series 2 features the following:

• Ergonomic operator station features easy to use pilot operated joystick controls for reduced operator fatigue and increased productivity.
• High performance power train provides high engine horsepower and torque, allowing part-throttle operation for lower sound levels and fuel consumption.
• Advanced hydraulic system is designed for maximum power and reliability.
• Single level suspension undercarriage provides low ground pressure, stability, high traction and fast travel.
• Easy routine maintenance helps reduce machine downtime for greater productivity.
• Broad range of performance matched Cat® Work Tools make the Cat Multi Terrain Loader the most versatile machine on the job

The Cat B-Series 3 Skid Steer Loader, with its many work tool options, delivers outstanding performance to help you get more done and increase your bottom line. Spacious, ergonomic operator station and easy-to-use pilot operated joystick controls keep you comfortable throughout the work day. High performance power train, advanced hydraulic system and traditional Cat reliability improve your productivity in the toughest working conditions.

Overview

• 360˚continuous rotation turntable for quick positioning
• Patented active oscillation system (4x4 models) automatically adjusts axle position for the terrain
• Positive traction drive maintains equal power to all drive wheels
• Rotating, self-leveling platform with hydraulic platform rotation
• Fully proportional platform controls with ramp up/down feature

• S-45
• Working Height*: 51 ft (15.72 m)
• Platform Height: 45 ft (13.72 m)
• Horizontal Reach: 36 ft 8 in (11.18 m)
• Lift Capacity: 500 lbs (227 kg)

Overview

• 360˚continuous rotation turntable for quick positioning
• Patented active oscillation system (4x4 models) automatically adjusts axle position for the terrain
• Positive traction drive maintains equal power to all drive wheels
• Rotating, self-leveling platform with hydraulic platform rotation
• Fully proportional platform controls with ramp up/down feature

• S-40 
• Working Height*: 46 ft (14.20 m)
• Platform Height: 40 ft (12.20 m)
• Horizontal Reach: 31 ft 8 in (9.65 m)
• Lift Capacity: 500 lbs (227 kg)

The Genie S-80X and S-85 telescopic booms offer greater horizontal outreach than any other type of aerial platform, make these machines the perfect choice for work in construction and industrial applications with limited access

Graph:

• Max Platform Height >>>>>> S-80: 80ft / S-85: 85 ft
• Max Horizontal Reach >>>>>> S-80: 71 ft 6 in / S-85: 76 ft 6 in
• Below Ground Reach >>>>>>> S-80: 6 ft 1 in / S-85: 9ft 6 in
• Platform Capacity >>>>>> S-80: 500 lbs/1,000 lbs | S-85: 500 lbs
• Machine Width and Length >>>>>> S-80: 8 ft 2 in / 36 ft 10 in | S-85: 8ft 2 in / 40 ft 4 in
• Machine Width >>>>>>> 8ft 2 in / 31 ft 10 in | S-85: 8 ft 2 in / 40 ft 4 in

Genie S-60 J telescopic boom offers the essential performance that operators need to get work done at height. It offers the right solution to get work done at height, including leading unrestricted platform capacity of 660 lb (300 kg), allowing for two occupants plus tools.

Graph:

• Max working height >>>>>> 66 ft 10 in
• Max horizontal Reach >>>>>> 40ft 6 in
• Stowed Height >>>>>> 8 ft 10 in
• Platform Capacity >>>>>> 660 lb
• Machine Width >>>>>>> 8ft 2 in - 31 ft 10 in

Basic Specs:

• Working Width - 23.6"
• Compaction Force - 7,868 lbs
• Frequency - 4,800 vpm
• Honda GX160 4.8 net hp
• Operating Weight - 470 lbs
• Fully enclosed engine protection hood made of high-strength grain-refined steel.
• Hydraulic travel lever adjustment
• Height adjustable steering rod
• Steering rod lockable in transport and working position
• Vibration and throttle regulation on the steering rod
• Highly wear resistant base plate with reinforced edges
• Fully protected V-belt
• Reinforced centrifugal clutch
• Automatically adjusting V-belt pulley
• Bumper protection
• Recoil starter
• Large-volume dry air filter with cyclone-type pre-cleaner
• Maintenance-free transistor ignition
• Automatic shutdown at low oil level

Fields of application: Heavy duty compaction on thick fill layers. D-series models are suitable for the compaction of hydraulically bound material, sand, gravel, crushed rock, semi-cohesive soils and rock.

• Active Vibration Control™: vibration reduction in the hammer mechanism and the grip area provides maximum user comfort for extended periods of work
• Ergonomic handles - new ergonomic shock absorbing handles provide additional user comfort in all day applications
• Rubberized housing cover helps prevent tool from accidental fall over when the tool is not in use
• Total portability - operates on 115/120V AC/DC, 15 A outlet or 2500 watt portable generator
• ServiceMinder™ brush system - shuts the Brute™ off when brush replacement, lubrication or preventative maintenance is needed
• Grease packed gear box and hammer mechanism - eliminates uncertainty of job site lubrication
• The plug in anywhere hammer - does not need a compressor

• Model Number: RS-428

• Model SC181H

• Model BC2402

The all-new TX 1000 - a giant step forward in performance and versatility. This lightweight maneuverable machine packs unmatched strength and reach in a compact package for the ultimate working advantage. The 1,000 pound rated operating capacity makes the TX 1000 a powerful, compact alternative to larger skid steer loaders and other machines.

TX 1000 Controls
New patent-pending control system exculsive to the Toro TX 1000 provides intuitive operation that's effortless for the operator, all day long.

1. Curl, dump, or float the bucket while raising or lowering the loader arms with one hand using the joystick
2. Grab the traction drie joystick for effortless single-hand control.
3. Activate the auxiliary circuit control lever to power the attachments instantly.

Product Information

Featuring two working modes, namely, hammer drilling and drilling, the Hilti TE 7-C is a versatile hammer drill. This Hilti corded drill can easily handle light-duty power tools with TE-C (SDS plus) connection ends. Designed for hard surfaces, this hammer drill is ideal for materials like concrete, masonry, and natural stone. Moreover, this Hilti corded drill has the capability to penetrate up to 150 mm. Drilling has never been easier, thanks to the 17 mm diameter of the Hilti TE 7-C.

Features

• Excellent power-to-weight ratio for fastening a wide variety of materials to concrete and steel
• Power regulation
• Fully automatic
• Low noise level

• The solution for fastening materials from drywall track to 2x4s, as well as suspended ceiling applications, into concrete and steel
• Fastening wood to concrete, sand-lime block or steel
• Attaching drainage foils and membranes to concrete or CMU block
• Installing wall or brick ties

• Concrete, masonry and natural stone
• Breaching and demolition
• Drilling range: 1/2" to 6"
• Optimum drilling range: 7/8" to 1 3/4"
• Weight: 20.9 pounds
• Active Torque Control (ATC)
• Active Vibration Reduction (AVR)
• Bit: SDS Max

The Kubota L47 is a 4WD backhoe loader tractor from the L series. This tractor has been manufactured by the Kubota since 2016. The Kubota L47 is equipped with a 2.4L four-cylinder diesel engine and hydrostatic transmission with infinite (3-range) forward and reverse gears.

The Kubota L47 backhoe loader tractor used the Kubota V2403 engine. It is a 2.4 L, 2,434 cm2148.5 cu.in) four-cylinder natural aspirated diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 102.4 mm (4.03 in) of the piston stroke. This engine produced 47.1 PS (34.6 kW; 46.4 HP) at 2,700 rpm of net horsepower and 33.5 PS (24.6 kW;33.0 HP) of PTO output power.

The Kubota L47 is equipped with hydraulic type power steering, multiple wet disks brakes, four-post ROPS/FOPS, and 67.0 liters (17.7 US gal.; 14.7 Imp. gal) fuel tank.

>b>Following attachments are available for the Kubota L47 backhoe loader tractor:
• Kubota TL1300/TL1300V loader

Vermeer continues its dedication to delivering highly innovative, fuel-efficient equipment with the BC1000XL brush chipper. Complete with an 89-horsepower (66.4 kW) GM 3.0L gas engine, the chipper is powered by a dependable electronic fuel injection (EFI) system. The BC1000XL also features a direct electronic pressure regulator that allows for greater control of fuel delivery, fuel economy and optimum combustion. This chipper comes standard with the Vermeer patented EcoIdle™ system and patented SmartFeed technology and has a 12-inch (30.5 cm) cutting capacity.

• Manufacturer: Little Wonder
• Model Number: Optimax-270H

JET 27" x 48" Forks, 5000-LB Capacity PALLET TRUCK -- High-quality welded steel construction with a durable powder coat finish 2-1/2" low profile design for smaller size pallet openings. Easy-to-use with single hand operation, fingertip controls and 180 degree turning radius. Extra wide poly-over-steel steer wheels provide a smooth, quiet ride with added traction and stability. Wheel bearings are double sealed and lifetime lubricated.

JET 22-1/2-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards.

• Manufacturer: MK Diamond
• Model Number: 159943

• Manufacturer: Milwaukee Tools

• Industry Leading 10.5 Amp Motor - delvers the most power for all applications.
• 0-420 SFPM - Up to 40% faster cuts.
• 4-7/8" Cutting Capacity - deep cut capacity for various materials.
• Updated Main Handle Design - optimized for balance and control.
• Variable Speed Dial & Trigger - adjusts the speed for different materials.
• Multi-Grip T-Handle -provides multiple grip options for increased control in any application.
• Updated Blade Bearing Design - improved durability with 8 large ball bearings.
• Adjustable Material Guide - durable steel guide that is adjustable for different materials.
• 2-Finger Variable Speed Trigger - ability to start the cut slowly for accuracy

• Manufacturer: Kushlan Products
• Model Number: 350WSB-12530

Genie AWP Super Series aerial work platforms are an industry favorite due to their ease of use, convenience and flexibility. Their lightweight maneuverability and durable design make them a versatile option for a wide variety of rental, light-duty construction and maintenance applications. The mast system is the most rigid in the industry. Constructed of durable aircraft-quality aluminum, the mast provides user comfort and security at all working heights. Units have a ground fault interrupter receptacle on the platform for convenient use of power tools. (ANSI/CSA only). The Standard Base is perfect for everyday applications.

• User-friendly ground and platform controls with auxiliary platform lowering
• Quick set-up and simple to operate
• Durable patented Genie mast system
• Easy to maneuver around and over obstacles with the Rocker Base System
• Small outrigger footprint for positioning close to walls
• Easy loading and transport in pickup trucks

• Manufacturer: Porter-Cable

• Manufacturer: Crain Tool
• Model Number: 076

• Made from solid steel for a lifetime of trouble-free service
• Flooring materials are protected by the roller's smooth surface and rounded corners
• All rollers float independently on the axle to compensate for subfloor inconsistencies
• Yoke and handle are painted to prevent rusting

JET 30" Black Head Center-Cut Bolt Cutter is specially designed to produce superior cutting force. The high-carbon alloy tool steel jaws are ideally suited to cutting rebar, medium tensile and soft bolts, rods, rivets, bars and chains with a maximum hardness of HRC-40. Designed with safety in mind, these bolt cutters exceed Federal Specifications and are sure to give you the quality and performance you've come to expect from JET

• Manufacturer: Bon Tool
• Model Number: 24-612

• Knee Kicker is for stretching and flattening of carpet
• Five setting length adjustment channel that extends from 17 1/2" to 21 1/2"
• Recessed trigger firmly locks to desired length
• Three nap grips and 16 adjustable steel pins
• Pin depth is adjusted with top pin dial

• Manufacturer: Power Flite
• Model PD-500

• Model Number: BN 22-147

• Model Number: D80032

• Manufacturer: MK Diamond
• Model Number: 153243